Biamp Vocia VI-8 - Manual (Page 5)

5
VOCIA 8-CHANNEL LIVE AUDIO INPUT DEVICE (VI-8) FRONT PANEL
Setup and Use
The Vocia software provides the interface for configuring and programming the VI-8. The information supplied by this manual relates to
hardware installation, physical connections, and device information. For more details on software setup, please consult the Vocia Software
Help File.
Front Panel Information
The VI-8 LEDs are as follows (from left to right when viewing the front of the chassis):
1. 24V DC power 1
2. 24V DC power 2
3. Fault
4. Activity
5. Status
6. Audio Channel 1
7. Audio Channel 2
8. Audio Channel 3
9. Audio Channel 4
10. Audio Channel 5
11. Audio Channel 6
12. Audio Channel 7
13. Audio Channel 8
Power (Chassis Indicator)
The VI-8 has two power indicators. If power is applied to one or both 24V DC power connectors, the corresponding LED will be on.
• Off – The power connection is not available or not within the voltage range.
• Solid green – The unit is receiving power.
Fault (Chassis Indicator)
There are two types of chassis Faults that will be reported depending on the severity of the problem. Audio may still be passing, but if the
condition causing the warning is not corrected, a failure may occur.
• Flashing amber – A Control Input configured as “high range – monitored” input has a Fault.
• Solid amber – A chassis Fault is active on the VI-8.