Biamp POTS-1-4 - Manual (Page 5)

5
VOCIA TELEPHONE PAGING ADAPTER (POTS-1) FRONT PANEL
Setup and Use
The Vocia software provides the interface for configuring and programming the POTS-1. The information supplied by this manual relates to
hardware installation, physical connections, and device information. For more details on software setup, please consult the Vocia Software
Help File.
Front Panel Information
The POTS-1 LEDs are as follows (from left to right when viewing the front of the chassis):
1. 24V DC power 1
2. 24V DC power 2
3. Fault
4. Activity
5. Status
6. Line 1 Line Status
7. Line 1 Hook Status
8. Line 2 Line Status
9. Line 2 Hook Status
10. Line 3 Line Status ( functional for POTS-1-4 model only)
11. Line 3 Hook Status (functional for POTS-1-4 model only)
12. Line 4 Line Status (functional for POTS-1-4 model only)
13. Line 4 Hook Status (functional for POTS-1-4 model only)
Power (Chassis Indicator)
The POTS-1 has two power indicators. If power is applied to one or both 24V DC power connectors, the corresponding LED will be on.
• Off – The corresponding power connection is not in the working voltage range.
• Solid green – The corresponding power connection is receiving 24V DC power.
Fault (Chassis Indicator)
There are two types of chassis Faults that will be reported, depending on the severity of the problem. Audio may still be passing, but if the
condition causing the warning is not corrected, a failure may occur.
• Off – Normal operation.
• Flashing – A warning has occurred, meaning some aspect of the unit chassis is not performing within normal specifications.
• Solid – A fault has occurred, meaning some aspect of the unit has failed and audio may not be passing.