Decolav 9721 - Manual (Page 2)

9721 MIRROR INSTALLATION
Customer Service: 561-274-2110
www.decolav.com LET YOUR DREAMS COME ALIVE, YOUR PASSIONS
BECOME REALITY, BE THE ENVY OF YOUR NEIGHBORS ®
2
STEP #2
o Raise Mirror Base above wall cleat and lower into position so that
the cleat that is installed by the factory contacts the cleat
previously mounted on the wall in Step #1. Carefully lower into
position.
o Push down on the top of the mirror to ensure the mirror cleat
and the wall cleat is fully seated into position. The mirror should be
fully against the wall when cleats are fully seated.
o Slight side to side adjustments can be made by lifting up slightly
on the mirror and sliding the mirror left and right.
Notes:
o Pictured item may be diff erent than actual item. This document is for instructional purposes only.
o We recommend two people to install this product.
Finished Wall
Figure B
STEP #3
o Position Supplied wall stay at the back of the mirror base and center (Wall stay can be installed on the
bottom or the top of the mirror base). See Figure C
o Using the supplied screws attach wall stay to the mirror base and to the wall. Wall anchors may be needed to
attach wall stay to the wall (not supplied) See Figure C
o The wall stay will prevent the unit from moving during the sliding of the front mirror.
Wall Stay
Supplied Screw (4)
Figure C
Notes:
o Pictured item may be diff erent than actual item. This document is for instructional purposes only.
o We recommend two people to install this product.