Acesonic DGX-212 - Manual (Page 11)

Basic Operation
Karaoke -
MICROPHONE MIXER
When a microphone is plugged into MIC1 or MIC2, the
system mixes the music with your voice.
1. Press POWER to turn on the system.
2. Load a Karaoke Disc.
3. Press PLAY to start playing.
4. Adjust MASTER MUSIC VOLUME on the remote controller.
5. Adjust Microphone volume from front panel.
6. Starting singing while the song is playing.
7. Adjust ECHO level on the remote/front panel to the
desired echo level.
10
Karaoke - USING MICROPHONE
The system has 2 microphone inputs for connecting up to
2 microphones at once.
Karaoke - REMOTE CONTROL
Karaoke - To recording singing(See Page12 -13):
1. Play MP3, CD,CDG,MP3G or VCD song from disc,
or
USB or SD card.
2. Insert SD card or USB as a file saving device if you
play from disc.
3. Select the song you want to record, and play the
song first. Then, press RECORD on the machine or
remote to start recording. Will re-play from the
beginning and start recording at the same time.
4. Press STOP or RECORD to stop recording, or when
the song finishes. The process will automatically end.
5. Press PLAYBACK on the remote to immediately
playback the last recorded song you have done.
6. Player will continue playing the next song unless
you set CUE OFF from the remote controller.
MP3, MP3G song from
Rip MP3G from CDG disc :
1. Insert a CDG disc into the disc tray. Insert a SD card
or USB device as MP3G file storage.
2.Press DISC RIPPING button on the remote
3. Select ripping speed (1 x or 4 x) and MP3
compression bit rate ( higher bitrate results in better
sound quality but has a bigger file size) from OPTIONS.
4. Select target tracks from TRACKS option. You can
select one, all or specific tracks.
5. After selecting songs, go to START option to process
the MP3G ripping.
6. After ripping, exit the window. You can find your
ripped songs in Ripping_XX(XX= numbers) folder in SD
card or USB storage drive
Scoring function
1. Turn on the scoring function in the setup menu, see
page 12 for more detail.
2. When you sing with the scoring function on, the
SCORE will show on screen. The score will be
displayed at the end of the song.
3. This function only supports in CDG disc mode.
(See also Page12 -13)
The battery compartment is located on the back of the
Remote control.
1. Open the lid of the Remote control battery
compartment.
2. Insert two (2) AAA batteries. Make sure that the
batteries are placed with the positive and negative
terminals in the correct directions per the (+) and (-)
marks inside the compartment.
3. Replace the lid of the Remote control battery
compartment.