Safety instructions – AEG KO_LAVAMAT 2550 User Manual

Page 4

Advertising
background image

4

Safety instructions

- Follow the installation and connection instructions
- Do not connect a damaged machine (e.g. damaged

during transport)

- Small quantities of water in the detergent/additive

compartment are due to factory tests

- To remove residue from manufacturing in the wash drum

and dispenser compartment, a wash programme without
clothes should be carried out - e.g. colour wash 60°C with
a 1/2 measuring beaker of detergent.

The safety of AEG electrical appliances is in conformity with
recognized technical standards and current legislation.
Nevertheless, we feel obliged to point out to you and other
possible users the following :

- Ensure before switching on the machine that the nominal

voltage and current type indicated on the manufacturer’s
plate correspond with the voltage and current type where
the machine is to be used. The necessary fuse protection
should also be read off the rating plate.

- If your ÖKO-LAVAMAT is in a room subject to temperatures

below freezing, the water must be removed from the
machine should the danger of freezing be expected.

- Before cleaning, care and maintenance, ensure that the

machine is switched off. You are completely safe if you
remove the plug from the power-point, or, in the case of a
fixed installation, when the circuit breaker is open or the
cartridge-fuse is completely removed (see installation and
connection instructions).

- Never spray the machine with a jet of water.

- Never pull the plug out by pulling on the cord, but rather on

the plug itself.

Before using
your machine for
the first time

Safety instruc-
tions for the user

Advertising