Altec Lansing Octiv Theater MP450 - Manual (Page 13)

11
e
n
Symptom Possible Problem Solution
iPad didn’t charge
iPad is not installed properly. Remove your iPad from the dock and check for obstructions on the
connectors in the dock and on your iPad. Then reseat it in the dock.
iPad is locked up. Please make sure your iPad is working properly before docking into the unit.
Please refer to your iPad manual for details.
AC adapter isn’t plugged into a wall outlet, or the
connector is not plugged into the power supply jack
on the back of the speaker system. Plug the AC adapter into a wall outlet and plug the connector into the supply
jack on the speaker system.
Sound is distorted
Volume level is set too high. Decrease the volume.
Sound source is distorted. If the iPad original sound source (sound file) is of poor quality, distortion
and noise are easily noticed with high-power speakers. Try a different audio
source such as a music CD.
Full-featured remote
doesn’t work Battery is weak. Replace current battery with a new battery.
Full-featured remote is not pointed toward the
speaker system. Point the full-featured remote toward the Altec Lansing speaker system and
move within 10 feet of the unit.
Troubleshooting