Hawk Industries Hawkjaw Jr. Manual 65K-2GJR Serial Numbers 10 to 20 - Manual (Page 26)

Adjust Spinner for Break Out (cont.)
26 Operation
Rest Position
1. Remove the Spinner Arm Pins
(P).
2. Rotate the Spinner back to the
Pullback position (R).
3. Insert the Spinner Arm Pins (P)
with retainer clips.
7. Use the rotary table to spin drill
pipe larger than 5 1/2" OD.
Place the HawkJaw spinner in
the rest position.
R
P
Part Numbers
Part Name Part#
Quick Release Pin 061-20093
Retainer Clip 061-92391A056