MIPRO MR-823 Dual-Channel Diversity Receiver - Manual (Page 5)

Unbalanced Level Switch :
0dB: Microphone input of a mixer or amplifier
+10dB: Electronic guitar/bass.
-6dB: If audio is distorted due to high vocal or instrument levels.
Unbalanced Audio Outputs , :
SEPARATE: From output jack B and A .
MIXED: From output jack B only.
Balanced Audio Output , : Plug an XLR audio cable from this connector to
the input of a mixer.
(The characteristic of the 3-pin connector is as shown in figure 5)
Electric Guitar/Bass Output:
Switch the Unbalanced Level Switch to "+10dB" position.
!
!
!
!
!
4 5
RECEIVER INSTALLATION
12
12
(Figure 3)
(Figure 4)
1. Install the 2 antennas to the antenna input connectors on the rear panel
illustrated in Figure 3 & 4.
2. Connecting the power supply: Connect the AC/DC adapter cable to the DC 12V
Power Input Connector illustrated in Figure 3 & 4. Next plug the adapter unit into
an appropriate AC outlet with caution to the correct voltage for both AC outlet and
adapter as marked.
12 18
16
18
18
19 13
13
14
14
15
15
16
16
20 17
17
UHF Dual-Channel Diversity Receiver UHF Dual-Channel Diversity Receiver
(Figure 5)
COLD -
GND
+ HOT
1
2
3
2
1
3
3. AUDIO OUTPUT CONNECTION:
14
14
17 13
17
19 20
13
13