MIPRO MT-801a Bodypack Transmitter - Manual (Page 2)

UHF Handheld Transmitter
1 2 3 4 5 6 7
 Light, rugged housing.
 Distinguished matte silver-gray color
grille.
 Robust bullet-shaped microphone
ensures no impact-damage when
dropped.
 Interchangeable microphone capsule
modules are available for replacement
and servicing. High dynamic range
allows high input level without
distortion.
 PLL design ensures transmission
reliability.
 A newly designed recessed power
switch is now located on the upper
housing for easier access.
 A set of 10 different color bands is
available to enhance channel
identification.
 Efficient transmission, low power
consumption and extremely low
handling noise.
KEY FEATURES PART NAMES AND FUNCTIONS
(Figure 1)
Grille: Protects microphone capsule and
prevents breathing, wind and POP noises.
Battery Status Indicator: Indicates the power
on/off and battery status.
The MIPRO handheld wireless microphone is a
modular design. It also incorporates proprietary dual
squelch to eliminate noise interference.
a. When the power switch is turned ON, the red
indicator flashes briefly and then go out, indicating
normal battery status.
b. If no flash occurs, it has either no battery, or the
battery is drained or installed incorrectly.
c. When the power switch is turned ON or during a
live performance, the red indicator stays lit,
indicating the battery level is low. A new battery
replacement is necessary.
Power On-off Switch: Slide the power switch
to the “ON” position for use or to the “OFF”
position when not in use.
Housing: Upper portion that is connected to the
capsule module. Internally it holds the
transmitter PCB and battery compartment.
Battery Compartment: Designed to
accommodate two 1.5V(AA) batteries.
Battery Cap: Covers the batteries in the battery
compartment.
Color Coded Protection Ring: Available in
different colors for channel differentiation.
1
2
3
4
5
6
7
1 2
UHF Handheld Transmitter