AVerMedia Technologies tv box - Manual (Page 8)

User’s Manual
5
External Amplified Speaker
External Amplified Speaker
(for 3D Surround Sound Effect)
STEREO
CONNECTOR
Audio Cable
(supplied)
Sound Card
RCA CONNECTORS
NOTE: This type of connection allows you to
have audio at all times and to adjust
the volume from the AVerTV Box. For
audio pass through connection, make
sure the AVerTV Box is powered on
or in standby mode.
Wall
Outlet
Power
Adapter
TV Antenna (75 ) Ω
Connecting the Antenna
Attach the antenna or cable TV to
the ANT port of AVerTV Box.
Connecting an Audio Cable
Plug the stereo end of the supplied audio cable
to your sound card LINE OUT port and
the other two RCA connectors to the
AUDIO2 IN port of AVerTV Box.
Connecting the External Amplified Speaker
Connect the speaker to the SURROUND port to
have a 3D Surround Sound effect. If you
have additional external amplified
speaker, you may connect it to
the SPEAKER port of
AVerTV Box.
Connecting the Power Adapter
Connect the supplied power
adapter to the DC IN port of AVerTV Box
then plug it into a standard AC power outlet.