NaceCare Solutions TP8X - Manual (Page 4)

2. Connect the vacuum hose to the machine as shown in Fig 1 (TP12QX and TP18SX have the connections
in the rear of the machine).
3. Connect the solution hose to the machine as shown in Fig 2
4. Connect the wand/hand tool to the end of the hose as shown in Fig 3
Fig 1 Fig 2
Fig 3
5. Plug the machine into the wall socket (see safety regulations).
6. Switch the water pump and vacuum motor on.
Now the machine is ready to operate.
Attention: Do not use the machine as a dry vacuum cleaner!
Do not let the pump run dry!