Pathway DMX QConnect Software for CR Manual - Manual (Page 15)

DMXQConnect for CR - User Guide Getting Familiar with DMXQConnect
12
P
ATCHING
First go to the Patch Mode pane at the far right of your screen. Make sure that
Offline is selected. This will ensure that DMXQConnect won’t try to send patch
information to the DMXPathfinder until you are ready.
We're now set to patch a few stations. First, left-click on one of the stations in
the Non-Connected Stations pane. Then, holding the left mouse button down,
“drag” the selected station over to the Sources pane and over top the desired
source (the source will highlight to indicate your selection), and release the
mouse. Your station will now appear in the Connected Stations pane. You
have now made your first patch connection. Try patching a few more of the
unconnected stations in the same manner. If you make a mistake simply drag
the station from the Connected Stations pane to the correct source in the
Sources pane.
I CONS & D ESCRIPTIONS
Whenever you click on a Station, either Connected or Non-Connected,
information associated with that station appears in the Station Detail pane at
the top of your screen. Click on any station. The station name and connected
status appear as the title of the Station Detail pane. Now click in the
description area of the Station Detail pane and type in a description such as:
Scrollers for cyc wash
This description can be modified to include reminders or notes at any time by
repeating the above process. Right-clicking on the description area gives you