Rhin-O-Tuff 3250CL - Manual (Page 7)

Coil
•Manually start Coil into the first 3-4 holes on right hand
side of book
•Press Coil Button to start roller spinning
•Gently bring the coil into contact with the front side of the
spinning roller while holding the book in a horizontal plane
as shown above
•Allow coil to spin into the book
•Position pliers with the RED dot facing up, to the ceiling as shown
•Holding pliers horizontally, insert the plier tips around
the last coil of the book on the right hand side of the book
•Close pliers completely; this will cut and crimp the coil
6
Crimping