KEMP Oracle x86 - Manual (Page 12)

Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 12 / 17
LoadMaster for Oracle x86 Installation
Installation Guide
Figure 2-11 Network Interface screen
15. In the Network Interface 0 screen, enter the IP address of the eth0 interface (the
network-facing interface of the LoadMaster) in the Interface Address input field.
16. Click the Set Address button.
17. Click the eth1 menu option within the Interfaces section.
18. In the Network Interface 1 screen, enter the IP address of the eth1 interface (the farm-
side interface of the LoadMaster) in the Interface Address input field.
19. Click the Set Address button.
This interface is optional, depending on the network configuration.
20. Select the Local DNS Configuration > Hostname Configuration menu options.
Figure 2-12 Set Hostname screen
21. In the Hostname configuration screen, enter the hostname into the Current Hostname
input field.
22. Click the Set Hostname button.
23. Click the Local DNS Configuration > DNS Configuration menu option.
Figure 2-13 DNS configuration screen
24. Enter the IP address(es) of the DNS Server(s) which will be used to resolve names locally
on the LoadMaster into the DNS NameServer input field.
25. Click the Add button.
26. Enter the domain name that is to be prepended to requests to the DNS nameserver into
the DNS NameServer input field.
27. Click the Add button.
27. Select Route Management and Default Gateway from the main menu.