Asus L1N64-SLI WS - Manual (Page 75)

ASUS LN-SLI WS -
OnChip RAID1 Function [Disabled]
Enables or disables the onchip RAID function.
Configuration options: [Enabled] [Disabled]
OnChip RAID2 Function [By RAID1]
Configuration options: [By RAID1]
IDE Configuration
OnChip RAID1 Function [Disabled]
OnChip RAID2 Function [Disabled]
Disabled
Enabled
4.3.7 IDE Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press <Enter> if you want to
configure the item.
Options
Block (Multi-sector Transfer) M [Auto]
Enables or disables data multi-sector transfer mode. When set to [Auto], the
data transfer from and to the device occurs multiple sectors at a time if the
device supports multi-sector transfer feature. When set to [Disabled], the data
transfer from and to the device occurs one sector at a time. Configuration options:
[Disabled] [Auto]
PIO Mode [Auto]
Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1]
[SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2]
[UDMA3] [UDMA4] [UDMA5]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration
options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]