Myron L 532M1 - Manual

description
This manual describes your Myron L DS Meter™, tells
you how to use it, and how to keep it working accurately
for many years.
Your model 532 three range DS Meter is a compact
instrument which operates on the principle of electrical
conductivity. It will quickly determine the conductivity or
ppm/Total Dissolved Solids of almost any solution. Model
532M1 has a dial calibrated in micromhos (µmhos), which
is equivalent to the metric microsiemens (µS). Models
532T1 and 532T2 convert the conductivity directly into
parts per million (ppm) of Total Dissolved Solids. All are
3.4” x 4.5” x 4.0” (85 x 129 x 126mm) and weigh less than
one pound (.45 kg). DS Meters are completely self-
contained. The built-in cell is automatically temperature
compensated from 50º to 160ºF (10º to 71ºC). They are
powered by a 9 volt battery good for at least 2000 tests, or
one year shelf life.
model
ranges
532T1 0-50, 0-500, 0-5000 ppm
532T2 0-25, 0-250, 0-2500 ppm
532M1 0-50, 0-500, 0-5000 µmho
By using an RE-10 Range Extender (see
ACCESSoRIES), the maximum range of each meter may
be increased ten times.
The pictures in this manual show the major operating
parts of your Myron L DS Meter. Handle your DS Meter
and identify these parts to become familiar with it.
Model 532T1 shown
Range Switch
(set on Internal Standard)
Cell Cup
Button
Upper Electrode
Meter Zero
Adjust
Pointer
three range ds meters™
opERATIng InSTRuCTIonS
User’s Manual for Models 532T1
532T2
532M1