Aussie Joey 7110.7.641 - Manual (Page 8)

8
Step 5) Assemble Sidebraces:
· Attach Right and Left Sidebraces (19 & 20) to legs with ST4.0 x 10 Screws. (FIG. 5A) Secure
Bottom Heat Shield to Left Sidebrace with M4x10 Bolts and M4 Wingnuts. (FIG. 5B) Allow Heat
Shield Edge to overlap Sidebrace edge.
(24) Rear CrossBrace
(Pre-assembled)
FIG. 5A
(21) SCREW, ST4.0 x 10
4 PC
FIG. 5B
(22) BOLT,
M4x 10MM
2 PC
(23) M4 WINGNUT
Heat Shield
edge over
Crossbrace
edge
(22) BOLT,
M4x10MM
(19) Right Sidebrace
(20) Left Sidebrace
(21) Screw,
ST4.0 x 10
(23) WINGNUT, M4
2 PC