MEGUIAR'S M35 - Manual (Page 3)

M35 - OEM Spay Finish
Environmental precautions and
cleanup methods
Personal Precautions
If emergency personnel are unavailable, contain spilled material. For small spills add
absorbent (soil may be used in the absence of other suitable materials) scoop up material and
place in a sealed, liquid-proof container for disposal. For large spills dike spilled material or
otherwise contain material to ensure runoff does not reach a waterway. Place spilled material
in an appropriate container for disposal.
6. Accidental release measures
:
Note: See section 8 for personal protective equipment and section 13 for waste disposal.
: Immediately contact emergency personnel. Keep unnecessary personnel away. Use suitable
protective equipment (Section 8). Follow all fire fighting procedures (Section 5).
Minimize contact of spilled material with soils to prevent runoff to surface waterways. See
Section 13 for Waste Disposal Information.
Handling
Handling and storage
Storage
7.
Wash thoroughly after handling.
Packaging materials
Use original container.
Keep container tightly closed. Keep container in a cool, well-ventilated area.
:
:
:
Recommended
8. Exposure controls/personal protection
Hand protection
Exposure controls
A respirator is not needed under normal and intended conditions of product use.
Use latex gloves.
Safety glasses. Eye protection
Respiratory protection :
:
:
Propylene glycol EH40-OES (United Kingdom (UK), 2000).
TWA: 10 mg/m
3 8 hour(s).
TWA: 474 mg/m 3 8 hour(s).
TWA: 150 ppm 8 hour(s).
TWA: 10 mg/m
3 8 hour(s). Form: Particulate
United Kingdom (UK)
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of
vapours below their respective occupational exposure limits. Occupational exposure
controls :
Skin protection Additional body garments should be used based upon the task being performed (e.g.,
sleevelets, apron, gauntlets, disposable suits). :
The lowest known value is 99.9°C (211.8°F) (Water). Weighted average: 102.64°C
(216.8°F)
Physical and chemical properties
Physical state
Boiling point
Vapour pressure
Relative density
Vapour density
Solubility
Liquid.
1 g/cm 3
>1 (Air = 1)
The highest known value is 2.3 kPa (17.5 mm Hg) (at 20°C) (Water). Weighted average:
2.23 kPa (16.73 mm Hg) (at 20°C)
Miscible in water.
Sweetish. Odour
pH
Blue. (Light.) Colour
Flash point Not applicable.
Risks of explosion of the product in presence of mechanical impact: Not available.
Risks of explosion of the product in presence of static discharge: Not available.
9.
8 [Basic.]
Explosive properties
:
:
:
:
:
:
:
:
:
:
:
Not applicable Oxidising properties :
General information
Appearance
Important health, safety and environmental information
Date of issue : Page: 3/6 April 30, 2004.