MEGUIAR'S M20 User Manual
Page 5
M20, Professional Polymer Sealant (21-155A): M2016
__________________________________________________________________________________________
Page: 5 of 14
Wear eye/face protection.
The following eye protection(s) are recommended: Safety glasses with side shields.
Skin/hand protection
Gloves made from the following material(s) are recommended: Nitrile rubber.
Respiratory protection
An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of
a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator
type(s) to reduce inhalation exposure:
Half facepiece or full facepiece air-purifying respirator suitable for organic vapours
For questions about suitability for a specific application, consult with your respirator manufacturer.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
Liquid.
Appearance/Odour
Sweet, pleasant odour; Creamy ivory liquid
pH
8.5 - 9.2
Boiling point/boiling range
198.9 ºC
Melting point
Not applicable.
Flammability (solid, gas)
Not classified
Explosive properties
Not classified
Oxidising properties
Not classified
Flash point
No flash point
Autoignition temperature
No data available.
Flammable Limits(LEL)
No data available.
Flammable Limits(UEL)
No data available.
Vapour pressure
No data available.
Relative density
0.96 [Ref Std:WATER=1]
Water solubility
Moderate
Partition coefficient: n-octanol/water
No data available.
Evaporation rate
No data available.
Vapour density
No data available.
Vapour density
No data available.
Viscosity
26 - 32 Pa-s
Density
0.96 g/cm3
9.2. Other information
Volatile organic compounds (VOC)
14.66 % weight
VOC less H2O & exempt solvents
516.69 g/l
SECTION 10: Stability and reactivity
10.1 Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section
10.2 Chemical stability