MEGUIAR'S G96 - Manual (Page 3)

G96, Multi-Purpose Cleaner (24-165A): G9624
__________________________________________________________________________________________
Page: 3 of 11
Corrosive
Contains:
Sodium Metasilicate
Risk phrases
R34 Causes burns.
Safety phrases
S23C Do not breathe vapour or spray.
S51 Use only in well ventilated areas.
S36/37/39B Wear suitable protective clothing, gloves, and eye and face protection.
S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S28C After contact with skin, wash immediately with plenty of water for 15 minutes.
S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where
possible).
S1/2 Keep locked up and out of reach of children.
Notes on labelling
Updated per Regulation (EC) 648/2004 on detergents.
Ingredients required per 648/2004 (not required on industrial label): <5%: Non-ionic surfactant. Contains: Perfumes.
R34 was applied based on test data.
2.3. Other hazards
May cause chemical gastrointestinal burns. May cause chemical respiratory tract burns.
SECTION 3: Composition/information on ingredients
Ingredient CAS Nbr EU Inventory % by Wt Classification
Non-Hazardous Ingredients Mixture 78 - 98
Sodium Metasilicate 6834-92-0 EINECS 229-
912-9 1 - 5 C:R34; Xi:R37 (EU)
Skin Corr. 1B, H314; STOT SE
3, H335 (CLP)
Met. Corr. 1, H290 (Self
Classified)
N,N-Dimethyldecylamine N-oxide 2605-79-0 EINECS 220-
020-5 0.1 - 1 Xi:R38-41 (Vendor)
N:R50 (Self Classified)
Skin Irrit. 2, H315; Eye Dam. 1,
H318 (Vendor)
Aquatic Acute 1, H400,M=1;
Aquatic Chronic 1, H410,M=1
(Self Classified)
Please see section 16 for the full text of any R phrases and H statements referred to in this section
Please refer to section 15 for the any applicable Notas that have been applied to the above components
For information on ingredient occupational exposure limits or PBT or vPvB status, see sections 8 and 12 of this SDS
SECTION 4: First aid measures