MEGUIAR'S G95 - Manual (Page 4)

G95, Hot Rims® All Wheel and Tyre Cleaner (24-57A): G9524
__________________________________________________________________________________________
Page: 4 of 15
Evacuate area. Ventilate the area with fresh air. Refer to other sections of this SDS for information regarding physical and
health hazards, respiratory protection, ventilation, and personal protective equipment.
6.2. Environmental precautions
For larger spills, cover drains and build dykes to prevent entry into sewer systems or bodies of water. Avoid release to the
environment.
6.3. Methods and material for containment and cleaning up
Contain spill. For large spills, if necessary, get assistance from professional spill clean up team. For small spills, carefully
neutralise spill by adding appropriate dilute acid such as vinegar. Work slowly to avoid boiling or spattering. Continue to add
neutralising agent until reaction stops. Let cool before collecting. Working from around the edges of the spill inward, cover
with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it
appears dry. Remember, adding an absorbent material does not remove a toxic, corrosivity or flammability hazard. Collect
as much of the spilled material as possible. Place in a metal container approved for use in transportation by appropriate
authorities. The container must be lined with polyethylene plastic or contain a plastic drum liner made of polyethylene. Clean
up residue with water. Cover, but do not seal for 48 hours. Dispose of collected material as soon as possible. Absorb
spillage to prevent material damage.
6.4. Reference to other sections
Refer to Section 8 and Section 13 for more information
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Keep out of reach of children. Do not breathe dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing.
Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Wash contaminated clothing before
reuse. Avoid contact with oxidising agents (eg. chlorine, chromic acid etc.) Keep away from reactive metals (eg. Aluminum,
zinc etc.) to avoid the formation of hydrogen gas that could create an explosion hazard.
7.2. Conditions for safe storage including any incompatibilities
Keep only in original container. Store in corrosive resistant container. Store in a well-ventilated place. Keep container
tightly closed. Store away from heat. Protect from sunlight. Store away from acids. Store away from oxidising agents.
7.3. Specific end use(s)
See information in Section 7.1 and 7.2 for handling and storage recommendations. See Section 8 for exposure controls and
personal protection recommendations.
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
Occupational exposure limits
Ingredient CAS Nbr Agency Limit type Additional comments
Formaldehyde 50-00-0 Health and
Safety Comm.
(UK) TWA:2.5 mg/m3(2
ppm);STEL:2.5 mg/m3(2 ppm)
Health and Safety Comm. (UK) : UK Health and Safety Commission
TWA: Time-Weighted-Average
STEL: Short Term Exposure Limit
ppm: parts per million
mg/m³: milligrams per cubic metre
CEIL: Ceiling
8.2. Exposure controls