MEGUIAR'S G10 - Manual (Page 5)

G10, Smooth Surface Clay Bar Replacement: G1001
__________________________________________________________________________________________
Page: 5 of 11
Partition coefficient: n-octanol/water No data available.
Evaporation rate Not applicable.
Vapour density Not applicable.
Decomposition temperature No data available.
Viscosity Not applicable.
Density 2 g/ml
9.2. Other information
Volatile organic compounds (VOC) 0 %
SECTION 10: Stability and reactivity
10.1 Reactivity
This material is considered to be non reactive under normal use conditions
10.2 Chemical stability
Stable.
10.3 Possibility of hazardous reactions
Hazardous polymerisation will not occur.
10.4 Conditions to avoid
None known.
10.5 Incompatible materials
None known.
10.6 Hazardous decomposition products
Substance Condition
None known.
Refer to section 5.2 for hazardous decomposition products during combustion.
SECTION 11: Toxicological information
The information below may not agree with the EU material classification in Section 2 and/or the ingredient
classifications in Section 3 if specific ingredient classifications are mandated by a competent authority. In addition,
statements and data presented in Section 11 are based on UN GHS calculation rules and classifications derived from
3M assessments.
11.1 Information on Toxicological effects
Signs and Symptoms of Exposure
Based on test data and/or information on the components, this material may produce the following health effects:
Inhalation
No health effects are expected.
Skin contact
Prolonged or repeated exposure may cause:
Dermal Defatting: Signs/symptoms may include localised redness, itching, drying and cracking of skin.