MEGUIAR'S D150 - Manual (Page 12)

D150, X-Press Liquid Wax (21-133A), D15001
__________________________________________________________________________________________
Page: 12 of 15
12.4. Mobility in soil
Please contact manufacturer for more details
12.5. Results of the PBT and vPvB assessment
No information available at this time, contact manufacturer for more details
12.6. Other adverse effects
No information available.
SECTION 13: Disposal considerations
13.1 Waste treatment methods
See Section 11.1 Information on toxicological effects
Incinerate in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during
incineration processes. As a disposal alternative, utilize an acceptable permitted waste disposal facility. Empty
drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations
classified as Hazardous as per applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes
unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the
available treatment and disposal facilities.
The coding of a waste stream is based on the application of the product by the consumer. Since this is out of the control of the
manufacturer, no waste code(s) for products after use will be provided. Please refer to the European Waste Code (EWC -
2000/532/CE and amendments) to assign the correct waste code to your waste stream. Ensure national and/or regional
regulations are complied with and always use a licensed waste contractor
EU waste code (product as sold)
08 01 11* Waste paint and varnish containing organic solvents or other dangerous substances
SECTION 14: Transportation information
ADR/IMDG/IATA: Not restricted for transport.
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Global inventory status
All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances
(EINECS), or are exempt polymers whose monomers are listed on EINECS. Contact manufacturer for more information The
components of this material are in compliance with the China "Measures on Environmental Management of New Chemical
Substance". Certain restrictions may apply. Contact the selling division for additional information. The components of this
material are in compliance with the provisions of the Korean Toxic Chemical Control Law. Certain restrictions may apply.
Contact the selling division for additional information. The components of this material are in compliance with the
provisions of Australia National Industrial Chemical Notification and Assessment Scheme (NICNAS). Certain restrictions
may apply. Contact the selling division for additional information. The components of this material are in compliance with
the provisions of Philippines RA 6969 requirements. Certain restrictions may apply. Contact the selling division for
additional information. The components of this product are in compliance with the new substance notification requirements
of CEPA. The components of this product are in compliance with the chemical notification requirements of TSCA.
15.2. Chemical Safety Assessment
Not applicable