MEGUIAR'S D115 - Manual (Page 5)

D115, Rinse Free Express Wash N’Wax (24-97C): D11501, D11505
__________________________________________________________________________________________
Page: 5 of 11
For questions about suitability for a specific application, consult with your respirator manufacturer.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state Liquid.
Appearance/Odour Sweet odour; greenish-blue
Odour threshold No data available.
pH 3.2 - 4
Boiling point/boiling range 100 ºC
Melting point No data available.
Flammability (solid, gas) Not applicable.
Explosive properties Not classified
Oxidising properties Not classified
Flash point Flash point > 93 °C (200 °F)
Autoignition temperature No data available.
Flammable Limits(LEL) No data available.
Flammable Limits(UEL) No data available.
Vapour pressure No data available.
Relative density 1 [Ref Std:WATER=1]
Water solubility Complete
Solubility- non-water No data available.
Partition coefficient: n-octanol/water No data available.
Evaporation rate No data available.
Vapour density No data available.
Decomposition temperature No data available.
Viscosity No data available.
Density 1 g/ml
9.2. Other information
Volatile organic compounds (VOC) 1.4 % [Test Method:calculated per CARB title 2]
Volatile organic compounds (VOC) 25 g/l [Test Method:calculated SCAQMD rule 443.1]
VOC less H2O & exempt solvents 444 g/l [Test Method:calculated SCAQMD rule 443.1]
SECTION 10: Stability and reactivity
10.1 Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section
10.2 Chemical stability
Stable.
10.3 Possibility of hazardous reactions
Hazardous polymerisation will not occur.
10.4 Conditions to avoid
None known.