ADC TrueNet TracerLight - Manual (Page 2)

12/07
•
103472AE
TrueNet
®
T
racerLight
®
TrueNet ® TracerLight ®
Connector Identification System
2 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
TracerLight Patch Cord
TracerLight optical patch cords feature a
flashing light source (LED) component near each
connector end. The TracerLight power source is
inserted with minimal force into the TracerLight
component on one end of the patch cord. This
causes the LED on each end to begin flashing
rapidly. As a result, the distant end of the patch
cord can be quickly and easily identified without
interruption of service.
Available in any standard length or connector
style, TracerLight patch cords have the same
functions, features, and stringent environmental
requirements as our standard patch cords.
Optical performance of the patch cords is
not affected by the TracerLight components.
TracerLight patch cords are installed in the same
manner as standard patch cords and can be
pulled through ADC‘s FiberGuide
® Fiber Cable
Management System with ease. Also compatible
with ADC's Next Generation frame with term
block counts up to 144.
TracerLight Patch Cord
Description Catalog Number 1
Multimode Duplex TracerLight Patch Cords
LC-LC with 50/125 multimode laser optimized to 300m, aqua FTL-PPKXXXM
LC-SC with 50/125 multimode laser optimized to 300m, aqua FTL-9PKXXXM
SC-SC with 50/125 multimode laser optimized to 300m, aqua FTL-99KXXXM
Singlemode Duplex TracerLight Patch Cords
LC-LC Singlemode FTL-CCZXXXM
LC-SC Singlemode FTL-7CZXXXM
SC-SC Singlemode FTL-77ZXXXM
O r d e r i n g I n f o r m a t i o n
Duplex
Tight
Buffered
Fiber
Aramid Yarn
Strength
Members
26 AWG
Copper
Wire (2)
PVC
Jacket
PVC
Jacket
1 XXX – Length in meters. Standard lengths: 001 = 1 meter, 002 = 2 meters, 003 = 3 meters,
005 = 5 meters, 006 = 6 meters, 010 = 10 meters, 015 = 15 meters.