Team Associated B44.3 - Manual (Page 23)

23
:: Body, Wheels, Tires Install - Bag P - Step 2
6953
8-32
LP steel
locknut
x2
x2 6952
8-32
locknut,
steel
:: Body, Wheels, Tires Install - Bag P - Step 4
x2
x2
1736
FT body
clips, blue
9729
Wing
shims
9772
High downforce
wing, 6.5”
:: Body, Wheels, Tires Install - Bag P - Step 3
Painting Tips:
Body :
Your B44.3 FT comes with a clear polycarbonate
body. You will need to prep the body before you can
paint it. Wash the inside thoroughly with warm water
and liquid detergent. Dry the body using a clean, soft,
lint-free cloth. Use the supplied window masks to
cover the windows from the INSIDE of the body (RC
cars get painted from the inside).
Using high quality masking tape, apply tape to the
inside of the body to create a design. Spray (either
rattle can or airbrush) the paint to the inside of the
body (prefferably dark colors first, lighter colors last).
NOTE: use ONLY paint that is recommended for use
with (polycarbonate) plastics. If you don’t, you can
destroy the plastic body!!!!).
After painting, cut the body along the trim lines. Make
sure to drill or use a body reamer to make the holes
for the body mounts and antenna!
#0266
Finnisher
X-Flow
body sold
by
JConcepts
x2 1736
FT body
clips, blue