Team Associated SC10GT - Manual (Page 9)

9
:: Ball Differential Build - Bag B
:: Ball Differential Build (cont.) - Bag B
:: Ball Differential Build (cont.) - Bag B
6574
5/64
diff
thrust
ball
6573
Thrust
washer
6589
5/32 x 5/16
bearing
6575
Diff
thrust
bolt
6581
3/32”
carbide
diff balls
7664
Diff gear
52T
x2
x2
x12
x6
#6591
Diff lube
#6588
black grease
Pre-compress
spring
!
As you tighten the diff bolt, you will notice the T-nut ears moving closer
to the bottom of the outdrive slot. This compresses the spring
behind the T-nut. The spring should be completely compressed at the
same time the T-nut reaches the end of the slot.
CAUTION! Pay close attention to the feeling when the spring is
completely compressed. Do not over tighten the bolt. When you
feel the spring completely compressed, loosen the diff bolt 1/8” of
a turn. You diff should now operate smoothly with resistance as the
outdrives move in opposite directions.
After you have driven the car once, re-check the diff setting.
7666
Diff ring
7666
Diff ring
7667
Diff outdrive
hub, right
7668
Diff outdrive
hub, left
#6591
Diff lube
#6591
Diff lube
6575
Locking
T-nut
6582
Diff
thrust
spring
!
6575
Diff bolt
cover