Team Associated RC8.2e - Manual (Page 25)

25
:: Shocks Assembly (cont.) - Bag J & JJ
:: Shocks Assembly (cont.) - Bag J & JJ
:: Shocks Assembly (cont.) - Bag J & JJ
Bladder Installation
89543
Front spring,
silver (4.3lbs)
(short spring)
89547
Rear spring,
silver (3.55lbs)
(long spring)
89352
Threaded
shock
collar
O-Ring
89355
Threaded
shock
collar
89354
16mm
shock
spring cup
89335
Shock
cap
89351
Shock
bladder
x2
x2
Note the direction
of the shock cap
when installing onto
shock standoffs
As you install the shock cap with the bladder, it will force
out any extra fluid. If you install the cap with the shaft
fully extended, you are running FULL REBOUND.
To run less rebound, unthread the cap 1-2 turns and
compress the shaft to the desired position and
re-tighten the cap with the shaft compressed.
Start with no rebound.
Some residual shock
fluid may appear from
your first few runs
around the shock cap
as a result of bleeding.
!
!
Build two
front and
two rear
shocks!
Install
two front
shocks.
!
!
A B C
Shock
fluid
25612
M3 locknut
with flange
89083
Shock
bushing