Team Associated SC10B User Manual
Page 24
:: Wheels and Tires
:: Wheels and Tires (cont.)
24
Build 2 Rear!
Build 2 Front!
!
!
91101
KMC hex
wheel
(black)
91209
SC10B front
wheel
(black)
91210
SC10B front
tire
w/insert
91210
SC10B front
tire insert
Racing Pin Tire
Soft Compound
(use on rear)
Note: Clean the rims and tire bead
where the two will mount to each other
before you glue them together. You
can clean them with either rubbing
alchohol, or r/c electric motor spray.
Place the foam insert inside the tire.
Install the tire on the rim, and push the
tire beads inside the groves on the rim.
Use Tire glue #1597 (not included)
to glue the tire to the wheel. Glue one
side at a time, allowing enough time for
the glue to dry before continuing to the
other side.
Tip: You can use a rubber band to hold
the tire tight against the wheel while
the glue is drying.
The rear tires included in this
RTR are made by JConcepts.
JConcepts tires can be
purchased at their website:
http://www.jconcepts.net
CA tire glue
#1597
CA tire glue
#1597
6953
8-32 steel
locking wheel
nut (low-prefile)
6952
8-32 steel
locking
wheel nut
Build left and
right sides!