Team Associated RC8.2 - Manual (Page 16)

16
: le n t an . :: Cleaning & Maintenance (cont.)
....started a few times to accomplish this. All fuel has been consumed
when the engine will no longer start. Now remove the glow plug and
inject a few drops of after run oil into the engine. Then re-install the glow
plug and turn the engine over for 3-5 seconds using your starter box or
pull-start. Remove dirt from the outside of your engine with a heavy brush.
Oily and greasy deposits should be removed with Kerosene or Methanol.
Parts Replacement - Over time, even a perfectly tuned and maintained
engine will experience a reduction in performance due to normal wear of
its mechanical parts. Replacing worn parts will ensure efficient operation
of the engine.
We recommend replacing the appropriate part if you
experience the following symptoms:
• Engine sound changes and easily overheats - The front and/or back
bearing are the likely cause and should be replaced.