Team Associated RC10B4.2 - Manual (Page 18)

18
:: Electronics Build - Step 9
:: Wheels / Tires and Body - Step 1
:: Wheels / Tires and Body - Step 2
6953
8-32
LP steel
locknut
x2
#1597
ca glue
#1597
ca glue
x2 9695
Buggy rear
wheel hex,
white
9690
Buggy front
wheel hex,
white 9663
B4.2 front
wheel/tire
pre-mounted
(white)
9664
B4.2 rear
wheel/tire
pre-mounted
(white)
x2
x2 x2
Carefully apply
tire adhesive to
the tire bead on
both sides.
Do one side at a
time, allow it to
dry before gluing
the other side!
!
x2 6952
8-32
locknut,
steel
To remove your battery pack from the vehicle, twist the thumb knobs to the
unlocked position, remove the battery strap, and then remove the battery.
When you install the battery, make sure the thumb knobs are locked before
operation.
You may need to adjust the height of the thumb knobs and/or the set
screws that the thumb knobs are attached to for your specific battery
pack type.
Unlocked Locked