Team Associated Rival Monster - Manual (Page 2)

2
:: Introduction
:: RIVAL MT Platform Features
:: Other Helpful Items
Associated Electrics, Inc.
26021 Commercentre Dr.
Lake Forest, CA 92630
http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · http://bit.ly/AEonFacebook
Customer Service
Tel: 949.544.7500
Fax: 949.544.7501
Thank you for purchasing this Team Associated Qualifier Series product. This manual contains
instructions and tips for maintaining your new RIVAL MT RTR. Please take a moment to read through
it and familiarize yourself with these steps as they will help you to understand each component’s
function and show you some tips for getting the most out of your RIVAL MT RTR. We are continually
changing and improving our designs; therefore, actual parts may appear slightly different than the
illustrations.
As part of the ongoing additions to the already successful Qualifier Series, Team Associated is proud
to release the RIVAL-MT RTR; a 1:8 scale 4WD electric off-road RTR monster truck.
For more information, scan the QR code to the right for videos and tutorials on the
RIVAL MT RTR!
http://www.teamassociated.com/Rival_Monster_Truck/
• Ultra rigid aluminum chassis
• 3 gear gearbox with center differential for superior traction and performance
with 6.06:1 internal ratio
• Includes 2 - 8.4V (7 cell) NiMH batteries with Deans ™ Ultra plugs ®
• XP SC1300-DB ESC with Deans ™ Ultra plug ®
o Works with 2-8.4V NiMH or NiCd or 2-7.4V LiPo batteries.
o Dual battery plugs for independent battery voltage sensing and optimum performance
• 8 oil filled shock absorbers
• Front and rear impact absorbing bumpers
• 4mm steel wire roll bar to protect body under impact
• Electronics tray with water resistant receiver box can hold 6-7 cell NiCd or NiMh batteries as well
as ROAR-approved 2S LiPo batteries, and is easily removed for cleaning or maintenance
• Reedy 1515-SL 2000kV brushless motor
• XP3G 2.4Ghz transmitter and micro receiver
• Alloy steel turnbuckles
Your RIVAL MT RTR requires the following items to complete your kit:
• Transmitter batteries (x6 AA’s) (#302, 303 AA batteries recommended)
• NiMH Battery charger (peak detection charger recommended)
(AE #610 NiMh/NiCD)
• Silicone Shock Fluid / Differential Fluid (Refer to catalog for complete listings)
• Body Scissors (AE Part # 1737)
• FT Threadlock (#1596)
• FT Hex Wrenches (AE Part # 1541, 1655) • Reamer / Hole Punch
• FT Nut Drivers (AE Part #1561, 1663-1668) • Calipers or a Precision Ruler
• FT Turnbuckle Wrench (#25384) • Needle Nose Pliers
• Green Slime shock lube (AE Part # 1105) • Soldering Iron / Wire cutters / Hobby knife
:: Additional Items Needed