Amphony 5.8 GHZ DIGITAL WIRELESS AUDIO TRANSMITTER / AMPLIFIER 1550 - Manual (Page 3)

© 2004 Amphony 3
Q: Do I need line of sight between the transmitter and amplifier ?
A: Line of sight between the transmitter and amplifier is preferred but not necessary for the amplifier
to operate. However, for maximum reliability, we recommend that the amplifier be placed such that
the number of walls of obstacles between the transmitter and amplifier is reduced to a minimum.
Q: How many channels of audio can I transmit ?
A: The transmitter transmits up to 2 channels of audio (stereo).
Q: How do I change the volume of the speakers connected to the amplifier ?
A: The volume of the speakers is mainly controlled by the volume which is fed into the transmitter.
The amplifier features a volume control which is set once during installation to control the maximum
volume at the speakers. This setting will depend on your room size and type of speakers. In a
surround sound application, this volume control will be set such that the speakers connected to the
amplifier are balanced with the other speakers. The transmitter also incorporates a volume control
to set the transmitter to the audio level of your audio source. This transmitter volume control affects
both the line and speaker audio input.
Q: Does the transmitter accept digital audio data ?
A: The Model 1520 transmitter does not connect to digital audio sources.
Q: Can I use multiple amplifiers at the same time ?
A: An unlimited number of amplifiers can be used that operate from the same transmitter. For
example, you can operate two seperate amplifiers to connect two speakers which are located apart
from each other. Each speaker connects to one of the two audio outputs of the amplifier. The other
audio output of each amplifier is not used in this case.
Q: Can I operate multiple transmitters in the same room, all of which receive audio from
different sources ?
A: While it is possible to connect multiple transmitters to different audio sources in the same room,
only one transmitter can be active at a time. However, it is possible to operate a 5.8 GHz transmitter
at the same time as a 2.4 GHz transmitter without any conflicts.
Q: Does the amplifier work with the Model 2500 headphone transmitter ?
A: The amplifier is not compatible with the Model 2500 headphone transmitter.