Minka Group F823-SL - Manual (Page 14)

5
ELECTRICAL CONNECTIONS
WARNING: To avoid possible electrical shock be sure electricity is turned off at the main fuse or
breaker box before wiring.
NOTE: The Aire Control ® System for this DC motor fans is equipped with a learning frequency
function which has 32 code combinations to prevent potential interference from other remote units.
The frequency on your Receiver and Transmitter units have been preset at the factory. (Fig. 13) No
frequency change is necessary, should you desire to install another Minka Aire DC motor fan within
the same home or area with a separate frequency code please see the "frequency interference"
troubleshooting section of this instruction manual to learn how to change the frequency.
Step 1. Motor to House Supply Wires Electrical Connections: Connect the WHITE wire (Neutral) from
the outlet box to the WHITE wire marked "AC in N" from the motor. Connect the BLACK wire (Hot)
from the outlet box to the BLACK wire marked "AC in L" from the motor. Secure all wire connections
with the plastic wire nuts provided. (Fig. 14)
FREQUENCY
Fig. 13