Minka Group F581-ORB - Manual (Page 13)

C
ARE OF YOUR
F
AN
11.
3. If your fan is provided with wood veneer
blades; you can apply a light coat of
furniture polish for additional protection
and enhanced beauty. Cover small scratches
with a light application of shoe polish.
4. Use a lint free lightly damp cloth or
duster to remove dust from the blades.
5. There is no need to oil your fan. The
motor has permanently lubricated bearings.
6. If your fan is provided with glass shades,
clean with lukewarm soapy water and a soft
cloth or sponge. DO NOT IMMERSE
GLASS SHADES IN HOT WATER.
DO NOT PUT GLASS SHADES INTO
AN AUTOMATIC DISHWASHER.
WARNING!
Make sure the power is off at the
electrical panel box before you
attempt any repairs. Refer to the
section, "Electrical Connections".
For any additional information about your Ceiling fan, please write to;
Here are some suggestions to help
maintain your fan.
1. Because of the fan's natural movement
some connections may become loose.
Check the support connections, brackets
and blade attachments twice a year. Make
sure they are secure. (It is not necessary to
remove fan from the ceiling).
2. Clean your fan periodically to help
maintain its new appearance over the
years. Use only a soft brush or lint free
cloth to avoid scratching the finish. Plated
finishes are sealed with lacquer to
minimize discoloration or tarnishing. Do
not use water when cleaning, this could
damage the motor, wood blades or
possibly cause an electrical shock.
For customer assistance call: 1-800-307-3267
1151 W. Bradford Court
Corona, CA 92882