ATEN CS-72A - Manual (Page 11)

Operation
Controlling the computers in your CS-72A installation from a
single console could not be easier. Two port selection methods
that provide instant access to the computers are available:
M Manual Port Selection
M Hotkey Port Selection
Manual Port Selection
With Manual Port Selection you simply press the appropriate
Port Selection switch on the unit’s front panel to give the KVM
focus to its corresponding port. The Port LED lights to indicate
that its port has the KVM focus.
Hotkey Port Selection
Hotkey selection allows you to toggle the KVM focus between
the computers from the keyboard, instead of having to manually
switch with the Port Selection buttons.
To hotkey toggle the ports:
1. Press and hold down the Num Lock key
2. Press and release the asterisk key or the minus key
3. Release the Num Lock key:
[Num Lock] + [*]
or:
[Num Lock] + [-]
Note: The asterisk or minus key must be released within one
half second, otherwise the hotkey operation is canceled.
- 9 -
2003-02-18