Minka Group F840-CF - Manual (Page 18)

INSTALLING THE LIGHT BULBS &GLASS SHADES
LIGHT KIT
ASSEMBLY
BLADE
BULB
GLASS
SHADE
Fig 20
9
Step 1. Remove the 3 screws from the light cap.
Step 2. Connect the white connectors from the light kit and fan, do the same with the
black connectors.
Step 3. Place light kit over the light cap, secure with the 3 screws previously removed.
Step 4. Install the 3-60w (Max.) candelabra base bulbs (bulbs included).
Step 5. Install glass shades, do not overtighten.
NOTE: Before starting installation, make sure power is turned off at the circuit breaker.
ATTENTION: The Energy Policy Act of 2005 requires this fan to be equipped with a 190
watt limiting device. If lamping exceeds 190 watts, the ceiling fan's light kit will shut off
automatically.