Martin Universal Design U-7200C Royal Elm Designer Table User Manual
Contents of carton: contents of parts bag
4444 Lawton Avenue, Detroit, MI 48208 USA • Tel:(313)895-0700/Fax:(313)895-0709
Email: [email protected] • visit us at www.MartinUniversalDesign.com
Royal Elm Designer Table U-7200C
Assembly Instructions
Contents of Carton:
Contents of Parts Bag:
[1] Threaded Lever [AA]
[1] Large Washer for Lever
[BB]
[1] Female Knob
[CC]
[2] Male Knob [DD]
[1] Washer for
Female Knob
[EE]
[2] Female Knobs
with bolt & washer
included [FF]
[2] Large Pin with
hole [EE]
[2] “C” Washers for
Large Pins
[FF]
[12] Long Wood
Screws [GG]
[2] 1-3/4” Bolts
[HH]
[4] Small Wood
Screws [II]
[2] Metal Tilt Adjustment Rods [JJ]
[2] Metal Pin End Caps for Tilt Rods [KK]
[2] Left & Right Legs
for A-Base [B]
[2] A-Base Ends [A]
[2] A-Base Cross Supports [C]
[2] Chanelled Side Supports [D]
[1] Upper Cross ESupport [E]
[2] Drawing Top Braces [G]
[1] Chanelled Cross Member with Threaded Rod [F]
IMPORTANT
If you have difficulty assembling your U-7200C Royal Elm
or need customer service assistance.
Please call: Martin Universal Design, Inc.
Customer Service Hot Line at
1-313-895-0700. If you need additional parts, it is not nec-
essary to contact your dealer, our Customer Service Rep.
will forward them to you immediately.
Created July 06 - RPI