Martin Universal Design U-DS90B Creation Station - Manual

4444 Lawton Avenue, Detroit, MI 48208 USA Tel:(313)895-0700/Fax:(313)895-0709
Email: [email protected] visit us at www.MartinUniversalDesign.com
NEW U-DS90W/U-DS90B Creation Station Assembly Instructions
IMPORTANT
If you have difficulty assembling your U-DS90W
Creation Station or need customer service
assistance. Please call:
Martin Universal Design, Inc.
Customer Service Hot Line at
1-313-895-0700.
If you need additional parts,
it is not necessary to contact your dealer,
our Customer Service Rep. will forward them
to you immediately.
Parts List
[A] - 24" x 40" Top
(1 piece)
[G] - Pencil Ledge
(1 piece)
[M] - Cross Support
End Cap (2 pieces)
[S] - Nuts
(4 pieces)
[B] - Upper Base End
(2 pieces)
[N] - Footbar Spacers
(2 pieces)
[T] - 6x65mm
(6 pieces)
[C] - Lower Base End
(2 pieces)
[H] - Drawer Supports
(4 pieces)
[D] - Foot Bar (1 piece)
[E] - Cross Support
(1 piece)
[F] - Top Support
(1 piece)
[I] - Tilt Mechanism
(2 pieces)
[J] - Top L-Bracket
(2 pieces)
[U] - Collars - includes
knob and bolt
(4 pieces)
[L] - Castors
(2 Locking & 2 non-locking)
[O] - 6 x55mm
(6 pieces)
[P] - 6 x 28mm
(8 pieces)
[V] - Washer
(4 pieces)
[R] - 4 x 12mm
(2 pieces)
Pg. 1
Additional Tool needed: Phiillips Screwdriver
[Q] - 5x14mm
[K] -
Rods
Drawer Supports
(4 pieces)
[X] - Wrench (1 piece)
[Z] - Drawers
(2 sets - these need
to be assembled)
Please see assembly
sheet for drawers.
[Y] - Wrench with hole
(1 piece)
[W] - Allen Wrench
(1 piece)
(8 pieces)
R
e
v
is
e
d
A
U
G
U
S
T
0
9