Martin Universal Design 92-50402 AVANTI SQUARE POST EASEL - Manual

Avanti I Single Post Easel Assembly Instruction
Model No. 92-50402 (black & square tube)
4444 Lawton Avenue, Detroit MI 48208 USA Tel:(313)895-0700 • Fax:(313)895-0709
E-mail: [email protected] • Visit us at: www.MartinUniversalDesign.com
IMPORTANT
If you have difficulty assembling your easel or need customer service assistance.
Please call: Martin Universal Design, Inc. Customer Service Hot Line at
1-800-366-7337. If you need additional parts, it is not necessary to contact your
dealer, our Customer Service Rep. will forward them to you immediately.
ITEM # PART NUMBER DESCRIPTION QTY.
1 .................... 97-01E10104 ............ Left Leg ................................................................................ 1
2 .................... 97-01E10204 ............ Right Leg ............................................................................. 1
3 .................... 97-01E10300 ............ Chrome Joiner (1.375” x 17.75”) ....................................... 1
4 .................... 97-01E10404 ............ Lower Front T-Support ....................................................... 1
5 .................... 97-01E10500 ............ Chrome Tube (1” x 17.75”) ................................................. 1
6 .................... 97-01E10604 ............ Tilt Support ......................................................................... 1
7 .................... 97-01E10700 ............ Allen Screw ......................................................................... 4
8 .................... 97-01E12100 ........... Center Column (long square tube with insert cap) ......... 1
9 .................... 97-01E11004 ............. Large Supply Tray ............................................................. 1
10 .................. 97-01E11104 ............. Top Canvas Supports ......................................................... 3
11 ................... 97-01E11200 ............. Knob Large Male ................................................................. 5
12 .................. 97-01E11400 ............. Adjustable Feet ................................................................... 4
13 ..................................................... Allen Wrench ....................................................................... 1
Assembly Instructions - Page 1 of 3
Step 1.
Begin by taking the right leg [part #2] and attaching the
11” x 17.75” chrome tube [part #5] onto the steel male-nub.
Please note you may have to tap with a rubber mallet
to securely attach tube. Continue by sliding the Tilt
Support [part #6] over the other end of chrome tube.
See FIG A.
pg 1
FIG A
FIG B
Step 2.
Take the 1.375” x 17.75” Chrome Joiner [part #3] and insert
one end into the right leg large hole [part #2].
See FIG B.
5
2
6
5
2
6
3
created 03/14/07