Martin Universal Design 91-6008 - Manual

IMPORTANT NOTICE
YOU WILL FEEL A SLIGHT
“BOUNCE-BACK” WHEN YOU SIT DOWN.
THIS IS NORMAL: NOT A DEFECT.
THE PNEUMATIC CYLINDER FOR THE SEAT
HEIGHT ADJUSTMENT REACTS TO YOUR
WEIGHT BY GIVING A LITTLE
Model
91-6008 & 91-6009
Assembled 91-6009
Parts
A. [1] Base Plate &
Lever
B. [1] Cylinder
[a] bellows 91-6008 model
[b] bellows 91-6009 model
C. [1] Bellows
[a] bellows 91-6008 model
[b] bellows 91-6009 model
D. [1] Backrest
Support Bar
Note: Part [K] is
attached to part [D]
E. [1] 5-Star
Base
F. [5] Push-in
Castors
G. [1] Backrest H. [1] Seat
Note: Part [N] 4 screws
are attached to part [H]
I. [1] Backrest
Cover
N. [4] 3/4” Black
Screws
Note: These screws are
attached to Part [H]
O. [2] 1” Black Screws
4444 Lawton Avenue, Detroit MI 48208 USA
Tel:(313)895-0700 • Fax:(313)895-0709
E-mail: [email protected]
Visit us at:
www.MartinUniversalDesign.com
Assembled 91-6008
a.
b.
J. [1] Footrest
Model 91-6008 only.
K. [1] Knob
Note: This knob is
attached to Part [D]
L. [4] Nuts M. [4] Bolts
Model 91-6008 only.
IMPORTANT
If you have difficulty assembling your chair or need customer service assis-
tance. Please call: Martin Universal Design, Inc. Customer Service Hot Line at
1-800-366-7337. If you need additional parts, it is not necessary to contact your
dealer, our Customer Service Rep. will forward them to you immediately.
a.
b.
MUD0107
PAGE 1
P. [1] Metal Backrest
Plate