Martin Universal Design U-199N PRIMA TRADITIONAL EASEL - Manual

Martin Universal Design, Inc.
4444 Lawton Avenue, Detroit, MI 48208 U.S.A.
Tel:(313)895-0700 • Fax:(313)895-0709
MARTIN UNIVERSAL DESIGN, INC.
U-199N TRADITIONAL EASEL
ASSEMBLY INSTRUCTIONS
Martin Universal Design, Inc.
4444 Lawton Avenue, Detroit, MI 48208 U.S.A.
Tel:(313)895-0700 • Fax:(313)895-0709
MARTIN UNIVERSAL DESIGN, INC.
U-199N TRADITIONAL EASEL
ASSEMBLY INSTRUCTIONS
STEP (1)
Position all 3 leg posts (A, B,
C) at the top (G). Insert 2" bolt
through posts, securing with
washer and wing nut.
STEP (2)
Attach rubber tips to bottom
of legs (D, E, F) tap lightly with
a hammer if needed.
STEP (3)
Position 3 leg posts (D, E, F)
to desired height. Insert 2" bolt
and secure at back with one
washer and wing nut on each
bolt. One end of chain must
be attached to back bolt be-
fore securing with washer &
wing nut.
STEP (4)
Attach canvas holder (H) and
pressure bar (I) with 3" bolt.
Place other end of chain over
bolt, secure with wing nut.
PLEASE NOTE: All holes are
drilled to close tolerances for
maximum rigidity. It may be nec-
essary to tap bolts in place with a
hammer.
PERIODIC RE-TIGHTENING
OF EASEL WILL ASSURE A
STURDY PRODUCT.
STEP (1)
Position all 3 leg posts (A, B,
C) at the top (G). Insert 2" bolt
through posts, securing with
washer and wing nut.
STEP (2)
Attach rubber tips to bottom
of legs (D, E, F) tap lightly with
a hammer if needed.
STEP (3)
Position 3 leg posts (D, E, F)
to desired height. Insert 2" bolt
and secure at back with one
washer and wing nut on each
bolt. One end of chain must
be attached to back bolt be-
fore securing with washer &
wing nut.
STEP (4)
Attach canvas holder (H) and
pressure bar (I) with 3" bolt.
Place other end of chain over
bolt, secure with wing nut.
PLEASE NOTE: All holes are
drilled to close tolerances for
maximum rigidity. It may be nec-
essary to tap bolts in place with a
hammer.
PERIODIC RE-TIGHTENING
OF EASEL WILL ASSURE A
STURDY PRODUCT.