American Standard 0621.001 - Manual

J20
BARRIER FREE
© 2008 AS America Inc. Revised 2/08
NOTES:
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
* See faucet section for additional models available
STUDIO ABOVE-COUNTER
RECTANGULAR SINK
❏ 0621.001
• Contemporary above-countertop rectangular
sink design
• Integral faucet deck for single hole faucet
(2064.101 ONE lavatory faucet
shown - not supplied)
• Rear overflow
• Fits most standard 22" vanities; separate vanity
top not required (9250.024 Studio 22" Vanity
recommended - not supplied)
Nominal Dimensions:
23-1/8" x 18-1/2" x 4-1/8"
(565 x 470 x 105mm)
Bowl sizes:
20-1/4" x 13-3/16" x 2"
(494 x 335 x 51mm)
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
STUDIO ABOVE-COUNTER
RECTANGULAR SINK
VITREOUS CHINA
1/2"
(ø15mm)
7/8"
(ø22mm)
1-3/8"
(ø35mm)
1-7/16"
(36mm)
2-11/16"
(ø69mm)
1-3/4"
(ø45mm)
12-7/8"
(328mm)
20-1/4"
(494mm)
13-3/16"
(335mm)
18-1/2"
(470mm)
23-1/8"
(565mm)
To Be Specified (Recommended):
❏
Vanity Base: Studio 22" Vanity 9205.024 or
22" vanity by others
❏ Faucet*: 2064.101 ONE lavatory faucet
❏ Faucet Finish: Polished Chrome (002)
❏ Supplies:
❏ 1-1/4" Trap: