American Standard 2900.222.002 - Manual

HD-57
© 2008 AS America, Inc.
WILLIAMSBURG
DECK-MOUNT TUB FILLER
WITH BRASS J-SPOUT
GENERAL DESCRIPTION:
Durable cast brass spout. Rigid brass and copper waterway
below deck provided for 12" installations (can be cut for 6-1/2"
installations). Brass valve bodies with 3/4" NPT inlets. 1/4 turn
washerless ceramic disc valve cartridges.
PRODUCT FEATURES:
Brass Construction: Durable. Ideal for prolonged
contact with water. Provides the finest surface for
application of finishes.
Ceramic Disc Valving: Assures a lifetime of drip-free
performance.
Exclusive Handle Alignment System: Allows fine
tuning of handle position.
2900.222.002 Shown
MODEL NUMBER:
2900.222.002 Deck-Mount Tub Filler
2 sets of handles (metal levers and porcelain levers).
Polished Chrome finish.
SUGGESTED SPECIFICATION:
Two handle deck-mount tub filler shall feature cast brass construction with brass and copper waterway. Shall also feature
1/4 turn washerless ceramic disc valve cartridges that are reversible for use with cross or lever handles. Fitting shall be
American Standard Model # 2900.222.002.
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0
5
10
15
20
25
80 60 40 20
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
NSF14
ASME A112.18.1M
CSA B125
32mm
(1-1/4) MAX.
TYP
74mm
(3)
70mm
(2-3/4) 102mm
(4)
(H) (C)
32mm
(1-1/4)DIA.
DRILLED
HOLE
3/4-14 MALE
N.P.T. INLETS
26mm
(1-1/16)
DIA.
2900.222.002 Deck mount tub filler. 2 sets of handles (metal levers and porcelain levers). Polished Chrome finish.
196mm
(7-3/4)
98mm
(3-13/16)
162mm
(6-3/8)
305mm
(12)
(can be field cut
for 6-1/2" installations)
60mm D.
(2-3/8)
86mm
(3-3/8)
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
Product Number Description