Air Distribution Concepts Cable - Manual (Page 3)

B) DOUBLE CABLE SUSPENSION
When installing a two cable suspension system, it is important to review the diffuser layout. It is important to
notice location of elbows, tees, or reductions. Improper placement of the cable may cause wear on the fabric.
Cable and turnbuckle installation are similar to single cable suspension systems. There are different variations of
double cable systems. Refer to the diagrams below. Snap hooks can be extended so that all cables will be at the
same elevation. Fittings may have quick connect joints such as zippers to ease the installation and maintenance
of the system. NOTE: 6:00 & 12:00 suspension is similar to 12:00 suspension with cable to cable distance the
same as 3 & 9:00 suspension. For Triple suspension use a combination of either 2:00, 10:00 with 12:00 or 3:00,
9:00 with 12:00
Note: The previous drawings illustrate possible double cable suspension systems. Some installations
may require cable support brackets. Since every installation is different, support brackets are not supplied. Triple
suspension systems used on larger diameters systems would be a combination of both single and double sus-
pension guidelines.
3:00 & 9:00 3:00 & 9:00 EXTENDED 2:00 & 10:00 2:00 & 10:00 EXTENDED