Tools required, Materials included in this package – Audiovox PROV 710 P User Manual
Page 3
TOOLS REQUIRED:
#2 Phillips Screwdriver
#1 Phillips Screwdriver
Utility or Razor Knife or Shears
Wire Strippers
Upholstery Hook Tool (for removal of panels as necessary)
Electrical Tape
Masking Tape
Multimeter (to verify 12 volt DC and continuity: Do not use a test light or logic probe)
Marker – to mark headliner
Scribe (to mark trim ring if used)
Misc. Electrical Connectors (to connect to vehicle power source. Requirements will vary from vehicle to vehicle)
DVD (To test the system operation after installation is complete).
O FF A U TO
O N
P O W E R
P LAY
STO P
E JEC T
MATERIALS INCLUDED IN THIS PACKAGE:
1)
PROV710/PROV710 S/PROV710 P Video Monitor (P/N 136D3468-1,-2,-3) (1 pc)
2)
Accessory Harness (P/N 8010730) (1 pc)
3)
2 Pin Power Wire Harness with choke (P/N 112B2824) (1 pc)
4)
Hardware Package:-
♦
#4 x 5/16” Screws (6 pcs)
♦
#8 x 5/8” Self Drilling Screws (4 pcs)
♦
#8 Washers (4 pcs)
5)
Dome light Harness (1 pc)
6)
Remote Control (P/N 136B3469) (1 pc)
1
.
2
.
3
.
5
.
4
.
-1-
6
.
M EN U
R E TU R N
A -B
R E PE AT
S ETU P
+
PO W E R
EJECT
D IS P LAY
A N G LE
AU D IO
S O UR C E
ZO O M
1
4
2
5
3
6
0
Enter