Nyrius ARIES Home - Manual (Page 6)

6
POWER
During the warm-up, the
POWER LED will blink un-
til connection between the
TRANSMITTER and the RE-
CEIVER is established. It will
take 15 - 20 seconds for the
system boot up successfully.
NOTE: Transmitter`s HDMI
out will still function in
standby mode
Ensure your TV set or projec-
tor is set to the appropriate
HDMI source and is powered
on.
Item / Mode Status Description Power LED
MODE POWER LED SOURCE LED
STANDBY SOLID RED OFF
SEARCHING FOR CONNECTION FLASHING WHITE FLASHING
WHITE
Item / Mode Status Description Power LED
MODE POWER LED SOURCE LED
STANDBY SOLID RED N/A
SEARCHING FOR CONNECTION FLASHING WHITE N/A
LED DESCRIPTION
Receiver
Transmitter