Nyrius Songo Link (BR30) - Manual (Page 7)

- 7 -
PAIRING
Play any Smartphone or Bluetooth® enabled device wirelessly through any 30-Pin
music dock*.
Certain Bluetooth® features, including those listed, may not be supported by all
compatible Bluetooth-enabled devices, and/or the functionality of such features may
be limited in certain devices, or by certain wireless carriers.
PAIR & CONNECT
Once you connect the Songo™ Link to your 30-Pin Docking Station, the Nyrius LED
will flash indicating it is in PAIRING mode searching for a signal.
1. Select the Bluetooth function on your device. Select "Nyrius BR30" on your
device to connect. If a pairing code is required, please use "0000".
2. Once successfully connected, the Nyrius LED will stop flashing & remain ON.
3. After inital connection, the Songo™ Link will seek the last device it was
connected to. If the device is turned on and in range, it will automatically
connect to it.
You can now control your music using your Bluetooth Device. The "Bluetooth
Active" icon will appear on the main screen when connected.
*May not be compatible with specific docking stations with digital audio. See
specifications for compatibility.
TO DISCONNECT
1. Select the Bluetooth function on your device. Select
"Nyrius BR30" on your device to disconnect.
2. Select YES if asked to disconnect. The Nyrius LED on
the Songo™ Link will flash slowly once disconnected.
The "Bluetooth Active" icon will disappear from the main screen once disconnected.
How you access your Bluetooth® Settings may vary from one device to another.