Brocks Performance ShortMeg Full System 14'' Muffler Yamaha FZ-09 - Manual

Document ID 996525
Page 1 of 3
Brock’s Performance • 4064 E. Patterson Road • Dayton, OH 45430 • Phone: 937-912-0054 • Fax: 937-912-0062
INSTALLATION INSTRUCTIONS FOR BROCK’S PERFORMANCE FZ-09 (14-)
ALIEN HEAD OR SHORTMEG FULL EXHAUST SYSTEM
The Alien Head or ShortMeg System for the FZ-09 (14-) is a high performance 3-into-1
exhaust system that replaces the stock head pipes, catalytic converter, and muffler.
Step 1: Check Package Contents:
The Alien Head or ShortMeg system is shown in (Figure 1).
The Package Contents Include:
1. Three (3) Head Pipe Mounting Flanges
2. One (1) Head Pipe Assembly (3-into-1)
3. One (1) Mid-Pipe
4. One (1) Alien Head or ShortMeg Muffler
5. One (1) Package Containing Springs,
Spring Puller, PAIR Valve Block-Off Cap,
Muffler-Mounting Bracket and
Required Hardware
6. One (1) Tube of Permatex™ Ultra
Copper® Sealant
7. One Packet Containing Instructions and
Supplemental Information
If any of the parts are missing, contact
Brock’s Performance.
Note: A slight ovaling of the tubing can occur
during the manufacturing process, this is
normal. A twisting motion may be required
during assembly/disassembly.
Step 2: Pre-Assemble Head Pipe and
Mid-Pipe to Ensure a Proper Fit
Between All Parts: The pre-assembled
system is shown in (Figure 2). Pre-assembly helps
to detect any potential shipping damage and
ensures that all parts fit properly. Apply WD-40®
to the pipe joints to ease assembly, adjustment
and especially disassembly.