Brocks Performance Radial Mount Strap Brackets R1 (09-13) User Manual
Brocks Performance For the car
Document ID 992092
Page 1 of 2
Brock’s Performance • 4064 E. Patterson Road • Dayton, OH 45430 • Phone: 937-912-0054 • Fax: 937-912-0062
RADIAL MOUNT STRAP BRACKETS & FRONT END LOWERING STRAP INSTALLATION
Radial Mount Strap Bracket Kit Contents:
1. Radial Mount Brackets (x2) 2. M10x20 Bolts (x2) 3. Serrated Washers (x2) 4. 1mm Thick Shims (06-11
ZX-14 ONLY x4) 5. M10x70 Bolts (2012+ ZX-14R ONLY x4) 6. 1.5mm Thick Shims (2012+ ZX-14R ONLY x4)
Radial Mount Strap Bracket Installation
STEP 1:
Begin by removing top and bottom brake caliper mounting bolts (Figure 1.)
STEP 2:
Re-insert the bolts through the Radial Mount Strap Brackets with the notched area facing toward the
brake caliper (Figure 2.) The ZX-14R (2012+) uses the supplied M10x70 bolts, OEM bolts are no longer required.
STEP 3 (For ZX-14/R Only):
Using the 1mm shim for ZX-14 (06-11) or 1.5mm shim for ZX-14R (2012+),
place the shims between the Radial Mount Strap Brackets and the caliper. See arrows (Figure 3.)
STEP 4:
Mount the Radial Mount Strap Bracket as shown (Figure 4.) Torque to 39 Nm (28 ft-lb.) Repeat the
same process on the opposite side.